Tuesday, June 26, 2012

In the Art Room: Weaving, Part 3

Weaving by one of my fourth grade students.
Hello, crafters! This week I am going to show you how to remove your completed weaving from your loom. If you have not started your weaving, no worries, you can begin here at Weaving, Part 1. Or, if you've finished your weaving and are now ready for the flap, you can catch up by reading Weaving, Part 2.

However, if you've done it all, then let's get to taking that weaving off the loom! This doesn't take long at all so you should be done in a snap.
You may begin on either side of your loom. I am starting on the side with the flap. Cut two warp strings close to the top. Never cut the warp strings close to the weaving as that will cause your weaving to unravel.
Tie your first knot so that it sits right on top of the weaving or weft strings. Do not pull the knot too tightly or it will cause the weaving to smash down and become uneven.
For the second knot, pull very tightly so that the double knot is secure.
Continue this process of cutting two strings near the top and double knot tying them until you have gotten to the end. If you have an odd number of warp strings, you will encounter three warp strings to tie at the end.
If you have this issue, simply put two strings together as one and tie it to the left over string. Double knot tie it as you have done the other warp strings.
Double check and make sure all warp strings are tied off and secure. At this point, you can snip the warp strings shorter.
When you flip your loom over, you will do the exact same thing. I like to pull the warp strings out from the other side or you could simply cut two as you have been.
Again, cut two, double knot tie two and continue until all strings are tied and secure. Trim warp strings.
Now you are ready to remove the weaving from the loom. This might be a bit of a struggle, especially if you have woven very tightly. But you can do it. Just put the end of the loom between your knees and start pulling the weaving off the loom. In art class, we say it's like taking a too-small sock off of someone's foot.
Don't worry about messing it up because you can't. Although it may look like you are.
And if you see this, don't panic.
Just flip it inside out and flatten by hand. Viola! You've woven a pouch!
Next week, I'll walk you through sewing on a button and making that little warp tail (seen in the photo above this one) disappear. Then we are on to creating the handle which is very easy and fun. Please feel free to ask questions or leave comments if you've got 'em. Happy weaving!

3 comments:

  1. Anonymous11/17/2012

    What do you do with the extra warp thread at the bottom?

    ReplyDelete
    Replies
    1. Hi! I just have the kids thread it and weave it back into their weaving. You can read her for more details, if you'd like:

      http://cassiestephens.blogspot.com/2012/07/in-art-room-weaving-final-chapter.html

      Delete
  2. Hello! I tried weaving a pouch to hopefully use to teach my 5th graders. Only problem is that the bottom of my pouch is pretty loose. It's almost like the weft strings couldnt's reach all the way to the bottom of the warp, so it's a bit loose. Do you have any way to prevent this? Thanks!

    ReplyDelete

Thank you so much for your comments. I appreciate each and every one :)

Note: Only a member of this blog may post a comment.